Midea EF 7.95kW Inverter Heat Pump & Air Conditioner
The Midea MFEF80VA-N combines 7.95kW cooling with 8.7kW heating in a wall-mounted split system for everyday home comfort. Inverter operation, adjustable airflow and cleaning functions support a flexible routine through warm and cool weather.
5-year warranty. This listing is for the equipment only. Room size, insulation, glazing and local conditions affect the capacity required; confirm suitability with your installer.
Key Features
- Heating and cooling in one system: 7.95kW rated cooling and 8.7kW rated heating provide year-round temperature control.
- Inverter technology: Adjusts system operation to help maintain a comfortable indoor temperature.
- i-Clean function: A frost-cleaning cycle helps remove accumulated dirt from the indoor heat exchanger.
- Automatic outdoor dedusting: The outdoor fan reverses after shutdown to help dislodge accumulated dust.
- Horizontal and vertical swing: Direct airflow around the room, with louvre position memory for your preferred setting.
- I-Sleep mode: A sleep setting provides another way to tailor operation to your routine.
- Auto restart: Restores operation after a power interruption.
- Low-noise setting: The series leaflet lists an indoor noise level of 37.5 dB(A) at 1 metre in Silence mode; noise varies by fan speed.
Product Specifications
| Model | MFEF80VA-N |
|---|---|
| Indoor unit dimensions (W × D × H) | 1055 × 231 × 330 mm |
| Outdoor unit dimensions (W × D × H) | 890 × 342 × 673 mm |
| Rated cooling capacity | 7.95 kW |
| Rated heating capacity | 8.7 kW |
| Maximum input power | 4050 W |
| Cooling energy stars (hot / average / cold) | 3.5 / 3.5 / 4 |
| Heating energy stars (hot / average / cold) | 3 / 2.5 / 2 |
| Indoor noise — Silence mode at 1m | 37.5 dB(A) |
| Refrigerant | R32 |
| Power supply | 220–240 V, single phase, 50 Hz |
| Temperature setting range | 16–30°C |
| Configuration | Wall-mounted split system; supply only |
| Warranty | 5 years |
Energy star ratings vary by climate zone and operating mode. Cooling and heating capacities are rated under standard test conditions. Maximum input power is an electrical specification and is not the same as heating or cooling output.
Installation
Supply only — installation is not included. Choose the system size and installation position with a qualified installer. Electrical work must be carried out by a licensed electrical worker.
Basic back-to-back installation uses up to 3 metres of piping and wiring. Existing additional charges: extra piping and wiring NZ$92 per metre; concrete pad NZ$75 per unit; wall bracket NZ$150–$200. Installation packages are quoted separately and are excluded from promotional discounts.

